Carbon resource
to X products
World Coal To X World Coal To X World Coal To X

Coal To Liquid Fuels

Coal To Liquid Fuels

In this page, “CTL” will stand for “Coal To Liquid Fuels” only.

“CTL” is also often used as a general expression for all liquid products produced from coal including petrochemicals. Coal To Chemicals is dealt with on a specific page here.


Several processes are available to convert coal to liquid fuels. The ones which today are the most frequently applied and studied are (i) the “indirect route” and (ii) the “direct route”.

1) Indirect route

It is called “indirect” because it is composed of two clearly separated steps.

Coal is first gasified with steam and oxygen to produce a synthetic gas or “syngas”, composed of carbon monoxide (CO), hydrogen (H2) and to a lesser extent carbon dioxide (CO2) and methane (CH4) as well as impurities.

The [H2]/[CO] ratio in the syngas generally needs to be increased, which is achieved in a “water-gas shift” reaction, where CO and water are converted to CO2 and H2. Syngas is then cleaned to eliminate dust, tar and acid gases.

The second step can consist in either one of the two following processes:

– The “Fischer-Tropsch” catalytic synthesis, which has benefitted from numerous experiences and is used in most demonstration plants and projects;

– The “Methanol to Gasoline” or “MTG” process: methanol (CH3OH) is first produced from syngas by a catalytic reaction of H2 and CO. Methanol is then dehydrated to give first DME (dimethyl ether, CH3OCH3) and then gasoline.

2) Direct route

In the “direct” route, coal is pulverized and mixed in a recycled slurry in which hydrogen is added under pressure. The mix reacts in an ebullated bed reactor to produce hydrocarbons which are refined under conventional refinery processes.

Both indirect and direct Coal To Liquid routes have respective advantages, in terms of versatility and quality of outputs (naphtha and diesel respectively). Most projects today are based on indirect processes, mainly thanks to the higher level of knowledge accumulated by experience and research so far.

Use of biomass

Liquid fuels can be produced from any hydrocarbon including biomass.

The main advantage is in decreasing the environmental footprint, as biomass is carbon-neutral.

Challenges come from the chemical nature of biomass, with lower calorific value, higher moisture content and tar formation, as well as seasonal supply variations.

Combining coal and biomass presents major advantages in terms of reaction temperature, as well as regular supply and the environmental footprint.

Operations and projects

Up to 2009, Coal To Liquid was commercially operated in South Africa only.

Four demonstration plants are in operation in China, where capacity has reached 29,000 barrels per day and is expected to rise to 200,000 bbl/day by 2017.

Projects exist in Australia, Botswana, India, Mongolia, USA and Russia.

Coal To Liquid

Coal To Liquids plant, Secunda, South Africa

Coal To Liquid

Coal To Liquid plant, Ordos, Inner Mongolia, China

Similar pages of World CTX website deal with Coal to Chemicals, Coal To SNG, Low Rank Coal Pyrolysis and Syngas for DRI.

Your comments on this page will be welcomed: please write to